Prof R Langley and Dr A Seshia
Dr A Seshia
Timing and Structure
Michaelmas term. 12 lectures + 2 examples classes + coursework. Assessment: 75% exam/25% coursework
The aims of the course are to:
- analyse the effects of random vibrations on machines and structures and the effects that occur as a result of non-linearities.
- describe the characteristics of random and non linear vibrations, deriving the effects of a system's dynamic response on the input and giving methods of determining resulting deflections or stresses.
- describe some of the characteristics of self excited vibrations.
As specific objectives, by the end of the course students should be able to:
- identify and describe random processes.
- predict the output from a system subjected to random forcing.
- predict how frequently output levels will be exceeded.
- apply the correct windows and filters for analysis.
- assess the reliability of frequency analyses.
- understand the effects of non-linearities on system response.
- calculate and use describing functions and harmonic balance.
- predict phase-plane behaviour of second-order systems.
- understand some of the common self excited vibrations and their characteristics.
Non-linear and self-excited vibration. (6L, Dr A A Seshia )
- Types of non-linearities in engineering systems and their major qualitative effects. Method of harmonic balance, describing functions;
- Representation of second-order nonlinear systems in the phase plane. Stationary points and their classification. Periodic orbits;
- Introduction to self-excited vibration. Examples of systems which are excited by instability and dry friction. Self excited oscillations in micro electromechanical systems.
Random vibration. (6L, Professor R S Langely)
- Characteristics of random vibrations and the use of probability distributions and spectral densities to describe such vibration:
- Auto and cross spectra. Transmission of random vibration through linear systems and derivation of output statistics and spectral densities;
- Narrow-band processes and determination of level-crossing frequency, distribution of peaks and frequency of maxima;
- Spectral analysis. Fourier transforms. Problems with sampling and relevance of aliasing. Calculation of spectra for sampled points;
- Basic lag and use of windows and smoothing. Coherence. Accuracy of measurements.
Experiment on non-linear vibrations. This involves about 4 hours in the laboratory and 4 hours writing-up.
[Coursework activity #1 title / Interim]
Coursework 1 brief description
Report / Presentation
[non] anonymously marked
day during term, ex:
Thu week 3
[Coursework activity #2 title / Final]
Coursework 2 brief description
Wed week 9
Please see the Booklist for Group C Courses for references for this module.
Please refer to Form & conduct of the examinations.
The UK Standard for Professional Engineering Competence (UK-SPEC) describes the requirements that have to be met in order to become a Chartered Engineer, and gives examples of ways of doing this.
UK-SPEC is published by the Engineering Council on behalf of the UK engineering profession. The standard has been developed, and is regularly updated, by panels representing professional engineering institutions, employers and engineering educators. Of particular relevance here is the 'Accreditation of Higher Education Programmes' (AHEP) document which sets out the standard for degree accreditation.
The Output Standards Matrices indicate where each of the Output Criteria as specified in the AHEP 3rd edition document is addressed within the Engineering and Manufacturing Engineering Triposes.
Last modified: 04/08/2017 12:06