Engineering Tripos Part IIB, 4A3: Turbomachinery, 2017-18
Module Leader
Lecturers
Dr N Atkins and Dr T Hynes
Lab Leader
Dr T Hynes
Timing and Structure
Michaelmas term. 75% exam / 25% coursework. 12 lectures (including examples classes) + coursework
Prerequisites
3A1 and 3A3 assumed
Aims
The aims of the course are to:
- provide a general understanding of the principles that govern the design of axial flow and radial flow turbomachines.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand the principles underpinning the study of turbomachine aerodynamics.
- know the requirements for different type of turbomachines.
- know the factors which influence the overall design of turbomachine stages and which influence the matching of components.
- know the factors which influence overall design of turbomachines for propulsion and stationary power-plant applications.
- evaluate the performance of turbine and compressor bladerows and stages using mean-line analyses.
- select a design for a given duty.
- present and understand information on stage and machine design.
- describe and understand compressor off-design performance.
- analyse the performance of propulsion systems and stationary power plant.
Content
Applications and Characteristics of Turbomachines (12L, Dr N R Atkins and Dr T P Hynes)
- Stage design and choice of design parameters.
- Specific speed, dynamic scaling and measures of efficiency.
- Analysis of the mean-line flow in compressors and turbines.
- Radial flow turbomachines.
- Characteristics of compressors, pumps and turbines.
- Matching of components: compressors and turbines; nozzles, throttles and diffusers. Compressor off-design problems; stall and its consequences.
- Application of turbomachines: power plant and aircraft propulsion systems.
Coursework
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Cascade Experiment Testing of a turbine cascade in a small wind tunnel to measure the blade surface pressure distribution, loss coefficient and flow exit angle. Time required: About 3 hours in the lab plus 4 hours write up. Learning objectives:
|
Experimental work done in pairs. Individual report. Anonymously marked. |
Reports are due 2 weeks after the date of the experiment. [15/60] |
Booklists
Please see the Booklist for Group A Courses for references for this module.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 05/10/2017 00:04
Engineering Tripos Part IIB, 4A3: Turbomachinery, 2023-24
Module Leader
Lecturers
Prof R.J. Miller and Dr J. Taylor
Lab Leader
Dr J. Taylor
Timing and Structure
Michaelmas term. 75% exam / 25% coursework. 12 lectures (including examples classes) + coursework
Prerequisites
3A1 and 3A3 assumed
Aims
The aims of the course are to:
- provide a general understanding of the principles that govern the design of axial flow and radial flow turbomachines.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand the principles underpinning the study of turbomachine aerodynamics.
- know the requirements for different type of turbomachines.
- know the factors which influence the overall design of turbomachine stages and which influence the matching of components.
- know the factors which influence overall design of turbomachines for propulsion and stationary power-plant applications.
- evaluate the performance of turbine and compressor bladerows and stages using mean-line analyses.
- select a design for a given duty.
- present and understand information on stage and machine design.
- describe and understand compressor off-design performance.
- analyse the performance of propulsion systems and stationary power plant.
Content
Applications and Characteristics of Turbomachines (12L, Prof. RJ Miller and Dr J. Taylor)
- Stage design and choice of design parameters.
- Specific speed, dynamic scaling and measures of efficiency.
- Analysis of the mean-line flow in compressors and turbines.
- Radial flow turbomachines.
- Characteristics of compressors, pumps and turbines.
- Matching of components: compressors and turbines; nozzles, throttles and diffusers. Compressor off-design problems; stall and its consequences.
- Application of turbomachines: power plant and aircraft propulsion systems.
Coursework
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Cascade Experiment Testing of a turbine cascade in a small wind tunnel to measure the blade surface pressure distribution, loss coefficient and flow exit angle. Time required: About 3 hours in the lab plus 4 hours write up. Learning objectives:
|
Experimental work done in pairs. Individual report. Anonymously marked. |
Reports are due 2 weeks after the date of the experiment. [15/60] |
Booklists
Please refer to the Booklist for Part IIB Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 30/05/2023 15:24
Engineering Tripos Part IIB, 4A3: Turbomachinery, 2025-26
Module Leader
Lecturers
Prof R.J. Miller and Dr J. Taylor
Lab Leader
Dr J. Taylor
Timing and Structure
Michaelmas term. 75% exam / 25% coursework. 12 lectures (including examples classes) + coursework
Prerequisites
3A1 and 3A3 assumed
Aims
The aims of the course are to:
- provide a general understanding of the principles that govern the design of axial flow and radial flow turbomachines.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand the principles underpinning the study of turbomachine aerodynamics.
- know the requirements for different type of turbomachines.
- know the factors which influence the overall design of turbomachine stages and which influence the matching of components.
- know the factors which influence overall design of turbomachines for propulsion and stationary power-plant applications.
- evaluate the performance of turbine and compressor bladerows and stages using mean-line analyses.
- select a design for a given duty.
- present and understand information on stage and machine design.
- describe and understand compressor off-design performance.
- analyse the performance of propulsion systems and stationary power plant.
Content
Applications and Characteristics of Turbomachines (12L, Prof. RJ Miller and Dr J. Taylor)
- Stage design and choice of design parameters.
- Specific speed, dynamic scaling and measures of efficiency.
- Analysis of the mean-line flow in compressors and turbines.
- Radial flow turbomachines.
- Characteristics of compressors, pumps and turbines.
- Matching of components: compressors and turbines; nozzles, throttles and diffusers. Compressor off-design problems; stall and its consequences.
- Application of turbomachines: power plant and aircraft propulsion systems.
Coursework
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Cascade Experiment Testing of a turbine cascade in a small wind tunnel to measure the blade surface pressure distribution, loss coefficient and flow exit angle. Time required: About 3 hours in the lab plus 4 hours write up. Learning objectives:
|
Experimental work done in pairs. Individual report. Anonymously marked. |
Reports are due 2 weeks after the date of the experiment. [15/60] |
Booklists
Please refer to the Booklist for Part IIB Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 04/06/2025 13:24
Engineering Tripos Part IIB, 4A3: Turbomachinery, 2021-22
Module Leader
Lecturers
Prof R.J. Miller and Dr L. Xu
Lab Leader
Prof R.J. Miller
Timing and Structure
Michaelmas term. 75% exam / 25% coursework. 12 lectures (including examples classes) + coursework
Prerequisites
3A1 and 3A3 assumed
Aims
The aims of the course are to:
- provide a general understanding of the principles that govern the design of axial flow and radial flow turbomachines.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand the principles underpinning the study of turbomachine aerodynamics.
- know the requirements for different type of turbomachines.
- know the factors which influence the overall design of turbomachine stages and which influence the matching of components.
- know the factors which influence overall design of turbomachines for propulsion and stationary power-plant applications.
- evaluate the performance of turbine and compressor bladerows and stages using mean-line analyses.
- select a design for a given duty.
- present and understand information on stage and machine design.
- describe and understand compressor off-design performance.
- analyse the performance of propulsion systems and stationary power plant.
Content
Applications and Characteristics of Turbomachines (12L, Prof. RJ Miller and Dr LP Xu)
- Stage design and choice of design parameters.
- Specific speed, dynamic scaling and measures of efficiency.
- Analysis of the mean-line flow in compressors and turbines.
- Radial flow turbomachines.
- Characteristics of compressors, pumps and turbines.
- Matching of components: compressors and turbines; nozzles, throttles and diffusers. Compressor off-design problems; stall and its consequences.
- Application of turbomachines: power plant and aircraft propulsion systems.
Coursework
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Cascade Experiment Testing of a turbine cascade in a small wind tunnel to measure the blade surface pressure distribution, loss coefficient and flow exit angle. Time required: About 3 hours in the lab plus 4 hours write up. Learning objectives:
|
Experimental work done in pairs. Individual report. Anonymously marked. |
Reports are due 2 weeks after the date of the experiment. [15/60] |
Booklists
Please refer to the Booklist for Part IIB Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 01/10/2021 10:41
Engineering Tripos Part IIB, 4A3: Turbomachinery, 2019-20
Module Leader
Lecturers
Prof W.N. Dawes and Prof Rob Miller
Lab Leader
Timing and Structure
Michaelmas term. 75% exam / 25% coursework. 12 lectures (including examples classes) + coursework
Prerequisites
3A1 and 3A3 assumed
Aims
The aims of the course are to:
- provide a general understanding of the principles that govern the design of axial flow and radial flow turbomachines.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand the principles underpinning the study of turbomachine aerodynamics.
- know the requirements for different type of turbomachines.
- know the factors which influence the overall design of turbomachine stages and which influence the matching of components.
- know the factors which influence overall design of turbomachines for propulsion and stationary power-plant applications.
- evaluate the performance of turbine and compressor bladerows and stages using mean-line analyses.
- select a design for a given duty.
- present and understand information on stage and machine design.
- describe and understand compressor off-design performance.
- analyse the performance of propulsion systems and stationary power plant.
Content
Applications and Characteristics of Turbomachines (12L, Prof. WN Dawes and Dr LP Xu)
- Stage design and choice of design parameters.
- Specific speed, dynamic scaling and measures of efficiency.
- Analysis of the mean-line flow in compressors and turbines.
- Radial flow turbomachines.
- Characteristics of compressors, pumps and turbines.
- Matching of components: compressors and turbines; nozzles, throttles and diffusers. Compressor off-design problems; stall and its consequences.
- Application of turbomachines: power plant and aircraft propulsion systems.
Coursework
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Cascade Experiment Testing of a turbine cascade in a small wind tunnel to measure the blade surface pressure distribution, loss coefficient and flow exit angle. Time required: About 3 hours in the lab plus 4 hours write up. Learning objectives:
|
Experimental work done in pairs. Individual report. Anonymously marked. |
Reports are due 2 weeks after the date of the experiment. [15/60] |
Booklists
Please see the Booklist for Group A Courses for references for this module.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 22/10/2019 10:04
Engineering Tripos Part IIB, 4A3: Turbomachinery, 2024-25
Module Leader
Lecturers
Prof R.J. Miller and Dr J. Taylor
Lab Leader
Dr J. Taylor
Timing and Structure
Michaelmas term. 75% exam / 25% coursework. 12 lectures (including examples classes) + coursework
Prerequisites
3A1 and 3A3 assumed
Aims
The aims of the course are to:
- provide a general understanding of the principles that govern the design of axial flow and radial flow turbomachines.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand the principles underpinning the study of turbomachine aerodynamics.
- know the requirements for different type of turbomachines.
- know the factors which influence the overall design of turbomachine stages and which influence the matching of components.
- know the factors which influence overall design of turbomachines for propulsion and stationary power-plant applications.
- evaluate the performance of turbine and compressor bladerows and stages using mean-line analyses.
- select a design for a given duty.
- present and understand information on stage and machine design.
- describe and understand compressor off-design performance.
- analyse the performance of propulsion systems and stationary power plant.
Content
Applications and Characteristics of Turbomachines (12L, Prof. RJ Miller and Dr J. Taylor)
- Stage design and choice of design parameters.
- Specific speed, dynamic scaling and measures of efficiency.
- Analysis of the mean-line flow in compressors and turbines.
- Radial flow turbomachines.
- Characteristics of compressors, pumps and turbines.
- Matching of components: compressors and turbines; nozzles, throttles and diffusers. Compressor off-design problems; stall and its consequences.
- Application of turbomachines: power plant and aircraft propulsion systems.
Coursework
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Cascade Experiment Testing of a turbine cascade in a small wind tunnel to measure the blade surface pressure distribution, loss coefficient and flow exit angle. Time required: About 3 hours in the lab plus 4 hours write up. Learning objectives:
|
Experimental work done in pairs. Individual report. Anonymously marked. |
Reports are due 2 weeks after the date of the experiment. [15/60] |
Booklists
Please refer to the Booklist for Part IIB Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 31/05/2024 09:57
Engineering Tripos Part IIB, 4A3: Turbomachinery, 2020-21
Module Leader
Lecturers
Lab Leader
Timing and Structure
Michaelmas term. 75% exam / 25% coursework. 12 lectures (including examples classes) + coursework
Prerequisites
3A1 and 3A3 assumed
Aims
The aims of the course are to:
- provide a general understanding of the principles that govern the design of axial flow and radial flow turbomachines.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand the principles underpinning the study of turbomachine aerodynamics.
- know the requirements for different type of turbomachines.
- know the factors which influence the overall design of turbomachine stages and which influence the matching of components.
- know the factors which influence overall design of turbomachines for propulsion and stationary power-plant applications.
- evaluate the performance of turbine and compressor bladerows and stages using mean-line analyses.
- select a design for a given duty.
- present and understand information on stage and machine design.
- describe and understand compressor off-design performance.
- analyse the performance of propulsion systems and stationary power plant.
Content
Applications and Characteristics of Turbomachines (12L, Prof. WN Dawes and Dr LP Xu)
- Stage design and choice of design parameters.
- Specific speed, dynamic scaling and measures of efficiency.
- Analysis of the mean-line flow in compressors and turbines.
- Radial flow turbomachines.
- Characteristics of compressors, pumps and turbines.
- Matching of components: compressors and turbines; nozzles, throttles and diffusers. Compressor off-design problems; stall and its consequences.
- Application of turbomachines: power plant and aircraft propulsion systems.
Coursework
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Cascade Experiment Testing of a turbine cascade in a small wind tunnel to measure the blade surface pressure distribution, loss coefficient and flow exit angle. Time required: About 3 hours in the lab plus 4 hours write up. Learning objectives:
|
Experimental work done in pairs. Individual report. Anonymously marked. |
Reports are due 2 weeks after the date of the experiment. [15/60] |
Booklists
Please refer to the Booklist for Part IIB Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 01/09/2020 10:23
Engineering Tripos Part IIA, 3G5: Biomaterials, 2018-19
Module Leader
Lecturers
Dr M Birch, Ms C Henderson, Dr A Markaki
lab Leader
Timing and Structure
Michaelmas term. 16 lectures.
Aims
The aims of the course are to:
- Develop an understanding of the materials issues associated with man-made and naturally-derived materials for medical purposes. Specific case studies will be considered in addition to the general framework.
Objectives
As specific objectives, by the end of the course students should be able to:
- Identify the mechanism by which medical devices and implants come to market.
- Know about the classes of materials used in medical materials and the associated reasons.
- Understand the requirements for materials used in the body and assess potential for implant-body interactions.
- Perform quantitative evaluations of drug delivery.
- Identify appropriate implants and tissue engineering approaches for tissue and body function replacements.
- Understand bioethics and safety regulations associated with medical devices and implants.
Content
Introductory concepts (1L)
- History of biomaterials
- Five therapies for missing organs
- Classes of Biomaterials overview
Biomaterials as integral parts of medical devices (1L)
Biocompatibility; sterilisation techniques (1L)
- Sterilisation techniques
- Choosing a technique
Sector analysis and regulatory affairs (1.5L)
- Market analysis
- Role of standards
- EU and US approval process
Advanced medical devices and biomaterials of the future (0.5L, non-examinable)
Orthopaedic Implants - Hip Replacement (2L)
- Types of implant fixation
- Materials in hip implants
- Surface engineering approaches
- In vivo loading of hip joint
Cardiovascular Stents (2L)
- Balloon expandable & self expanding stents
- Materials in stents
- Stent mechanics and design
Synthetic polymers for tissue engineering applications (2L)
- Introduction to polymers
- Synthetic biodegradable polymers
Host response to implants (1L)
- Wound repair
- Innate immunity
- The biological response to biomaterials
Using cells in tissue engineering (1L)
- What happens when biomaterials fail
- Cell therapy
- Combining cells with scaffolds
- Working with biology - implant integration and vascularisation
Naturally derived polymers for tissue engineering application (1L)
Drug delivery and diffusion (2L)
- Drug delivery systems
- Diffusion controlled systems in drug delivery
Further notes
Examples papers
Example papers are available on Moodle.
Coursework
Full Technical Report:
Students will not have the option to submit a Full Technical Report.
Booklists
Biomedical Engineering: Bridging Medicine and Technology by W. Mark Saltzman
Biomaterial Science: An Introduction to Materials in Medicine. Edited by Ratner et al.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
S1
The ability to make general evaluations of commercial risks through some understanding of the basis of such risks.
S4
Awareness of the framework of relevant legal requirements governing engineering activities, including personnel, health, safety, and risk (including environmental risk) issues.
S5
Understanding of the need for a high level of professional and ethical conduct in engineering.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
P7
Awareness of quality issues.
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 23/07/2018 10:40
Engineering Tripos Part IIA, 3G5: Biomaterials, 2017-18
Module Leader
Lecturers
Dr S Huang, Dr M Birch, Dr A Markaki, Dr R Daly
lab Leader
Timing and Structure
Michaelmas term. 16 lectures.
Aims
The aims of the course are to:
- Develop an understanding of the materials issues associated with man-made and naturally-derived materials for medical purposes. Specific case studies will be considered in addition to the general framework.
Objectives
As specific objectives, by the end of the course students should be able to:
- Identify the mechanism by which medical devices and implants come to market.
- Know about the classes of materials used in medical materials and the associated reasons.
- Understand the requirements for materials used in the body and assess potential for implant-body interactions.
- Perform quantitative evaluations of drug delivery.
- Identify appropriate implants and tissue engineering approaches for tissue and body function replacements.
- Understand bioethics and safety regulations associated with medical devices and implants.
Content
Introductory concepts (1L)
- History of biomaterials
- Five therapies for missing organs
- Classes of Biomaterials overview
Synthetic polymers for tissue engineering applications (2L)
- Introduction to polymers
- Synthetic biodegradable polymers
Host response to implants (1L)
- Wound repair
- Innate immunity
- The biological response to biomaterials
Using cells in tissue engineering (1L)
- What happens when biomaterials fail
- Cell therapy
- Combining cells with scaffolds
- Working with biology - implant integration and vascularisation
Naturally derived polymers for tissue engineering application (1L)
Drug delivery and diffusion (2L)
- Drug delivery systems
- Diffusion controlled systems in drug delivery
Orthopaedic Implants - Hip Replacement (2L)
- Types of implant fixation
- Materials in hip implants
- Surface engineering approaches
- In vivo loading of hip joint
Cardiovascular Stents (2L)
- Balloon expandable & self expanding stents
- Materials in stents
- Stent mechanics and design
Biomaterials as integral parts of medical devices (1L)
Biocompatibility; sterilisation techniques (1L)
- Sterilisation techniques
- Choosing a technique
Sector analysis and regulatory affairs (1.5L)
- Market analysis
- Role of standards
- EU and US approval process
Advanced medical devices and biomaterials of the future (0.5L, non-examinable)
Further notes
Examples papers
Example papers are available on Moodle.
Coursework
Full Technical Report:
Students will not have the option to submit a Full Technical Report.
Booklists
Biomedical Engineering: Bridging Medicine and Technology by W. Mark Saltzman
Biomaterial Science: An Introduction to Materials in Medicine. Edited by Ratner et al.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
S1
The ability to make general evaluations of commercial risks through some understanding of the basis of such risks.
S4
Awareness of the framework of relevant legal requirements governing engineering activities, including personnel, health, safety, and risk (including environmental risk) issues.
S5
Understanding of the need for a high level of professional and ethical conduct in engineering.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
P7
Awareness of quality issues.
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 18/09/2017 09:31
Engineering Tripos Part IIA, 3D8: Geo-Environmental Engineering, 2024-25
Module Leader
Lecturers
Prof S P G Madhabhushi and Prof A Al-Tabbaa
Lab Leader
Timing and Structure
Lent term. 16 lectures and Lab.
Aims
The aims of the course are to:
- The aim of the course is to introduce the transport processes of fluids, water and pollutants, in the porous media that constitute the geo-environment.
- The module aims to address the factors that influence groundwater, heat and pollutant transport, practical and design applications and problems that might arise.
- This course aims to introduce the students to the flow regimes that occur in porous media and ways to estimate the flow quantities using flownets.
- Similarly heat flow through porous media is introduced drawing parallels with the groundwater flow.
- Contaminant transport through porous media is another important aspect in geo-environmental engineering that is addressed in this module.
- Practical ways to dispose waste into the ground, the effects the contaminants have on the host soil and necessary aspects of remediation of contaminated land will also considered.
Objectives
As specific objectives, by the end of the course students should be able to:
- Understand the geotechnical environment.
- Determine flow patterns in steady state groundwater seepage.
- Evaluate potentials, pore water pressures, and flow quantities in the ground by constructing flow nets.
- Anisotropic soils and flow nets
- Seepage below concrete dams
- Seepage through embankment & earth dams
- Excavations and seepage, Cofferdams and stability
- Draw parallels between groundwater flow and heat flow in porous media
- Develop necessary skills to estimate heat storage and extraction from ground
- Introduction to contaminated soil and its remediation
- Understand the soil properties that affect the geo-environment and vice versa
- Develop an understanding of the interactions between soils and contaminants
- Understand the effect of soil contamination on geotechnical properties
- Develop an understanding of the fate and transport mechanisms of contaminants in the ground
- Solving of Advection-Dispersion equation using error functions
- Develop appreciation of the contaminated land/landfills environment
- Understand disposal of waste into well-engineered systems
- Be able to design a solution relevant to land remediation or a landfill
Content
The following topics will be covered:
Flow of Water through Porous Media, is an important aspect in the design of many civil engineering structures such as retaining walls, caissons, excavation for foundations, etc. As it will be shown in the second part of the module, the same physical principles and mathematical concepts can be used to understand flow of heat in porous media, for example, in the design of energy piles or ground source heat pumps.
Contaminant Transport through Porous Media, is important to understand the presence of contaminants in the ground and how they are transported through various mechanisms and how they affect the properties of the soil. Equally disposal of waste of waste safely into well-engineered facilities is critical to minimise the environmental impact of the waste.
Groundwater, Seepage and Heat Flow in Granular media (8L)
- Introduction
- Concept of porous media and bulk properties.
- Definitions of potential head, pressure head and pore pressure.
- Groundwater flow and seepage
- Theory of flownets
- Anisotropic soils and flownets
- Darcy's law and Hydraulic conductivity
- Laboratory and in situ measurements
- Seepage below concrete dams
- Seepage through embankments and earth dams
- Stability and seepage around excavations
- Coffer dams and their stability
- Fourier’s law and heat flow in porous media
- Parallels between ground water flow and heat flow
- Ground source heat pumps
- Storage and extraction of heat from ground
Contaminated Land and transport of contaminants through ground (8L)
- Introduction to contaminated land and contaminants in the geo-environment
- Introduction to waste containment structures – landfills
- The structure of clays
- The clay-water interactions
- The clay-water-contaminant interactions
- The effect of contaminants on the geotechnical properties of soils
- Mechanisms of contaminant transport
- Fick’s law for diffusion in porous media, dispersion and sorption, Peclet’s number
- Solving advection-dispersion equation, Error functions
- Land remediation and waste containment design applications
- Relevant case studies and project examples.
Coursework
Environmental Geotechnical Engineering
Learning objectives:
- Axi-Symmetric flow of ground water into a well boring
- Axi-Symmetric heat flow in saturated soil
Practical information:
- Sessions will take place in [ISG-88], during week(s) [2-6].
- This activity [doesn't involve] preliminary work but read the lab handout prior to the lab session ([1 hr]).
Full Technical Report:
Students will have the option to submit a Full Technical Report.
Booklists
Please refer to the Booklist for Part IIA Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
D1
Wide knowledge and comprehensive understanding of design processes and methodologies and the ability to apply and adapt them in unfamiliar situations.
S1
The ability to make general evaluations of commercial risks through some understanding of the basis of such risks.
S3
Understanding of the requirement for engineering activities to promote sustainable development.
S4
Awareness of the framework of relevant legal requirements governing engineering activities, including personnel, health, safety, and risk (including environmental risk) issues.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
E4
Understanding of and ability to apply a systems approach to engineering problems.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US2
A comprehensive knowledge and understanding of mathematical and computer models relevant to the engineering discipline, and an appreciation of their limitations.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 31/05/2024 07:29
Pages
