Engineering Tripos Part IIB, 4D7: Concrete Structures, 2018-19
Module Leader
Lecturers
Prof C Middleton, Dr J Orr, Dr P Desnerck
Lab Leader
Dr J Orr
Timing and Structure
Michaelmas term. 12 lectures + 2 examples classes + coursework. Assessment: 75% exam/25% coursework.
Prerequisites
3D3 assumed
Aims
The aims of the course are to:
- carry further basic material on reinforced concrete studied in Part IIA, treat such matters as durability and corrosion, design of beams, slab, columns & frameworks (for shear and torsion as well as bending), but leaving prestressed concrete to 4D8.
Objectives
As specific objectives, by the end of the course students should be able to:
- have a good basic appreciation of the constituents and properties of concrete.
- understand deterioration processes affecting reinforced concrete, and how to control them.
- analyse simple concrete structural components and frameworks, and design them to practical requirements.
Content
Background to cement and concrete (1L)
Recent developments
Limit state design (1L)
- Probability concepts: partial safety factors (brief survey)
- Failure case studies.
Material properties (2L)
- Hydration and strength of cement paste;
- Uniaxial properties of concrete;
- Concrete under multiaxial stress.
Durability (2L)
- Net Present Value: whole life costing;
- Deterioration of concrete;
- Water migration through concrete; concrete in fire (brief mention)
- Corrosion of steel in concrete; preventative measures.
Reinforced concrete structures (6L)
- Serviceability: crack widths, deflections (revision)
- Initial sizing of members (revision of 3D3)
- Beams, slabs and frameworks at ultimate limit state;
- Column design, instability;
- Shear failure (and fracture mechanics);
- Truss analogy, torsion;
Coursework
This will consist of two parts (i) witnessing experimental laboratory techniques in the context of reinforced concrete testing, plus short write-up, and (ii) a short design exercise.
| Coursework | Format |
Due date & marks |
|---|---|---|
|
[Coursework activity #1 title / Interim] Coursework 1 brief description Learning objective: |
Individual/group Report / Presentation [non] anonymously marked |
day during term, ex: Thu week 3 [xx/60] |
|
[Coursework activity #2 title / Final] Coursework 2 brief description Learning objective: |
Individual Report anonymously marked |
Wed week 9 [xx/60] |
Booklists
Please see the Booklist for Group D Courses for references for this module.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
S1
The ability to make general evaluations of commercial risks through some understanding of the basis of such risks.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
P8
Ability to apply engineering techniques taking account of a range of commercial and industrial constraints.
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
Last modified: 25/09/2018 07:39
Engineering Tripos Part IIB, 4D7: Concrete Structures, 2017-18
Module Leader
Lecturers
Prof C Middleton, Dr J Orr
Lab Leader
Dr J Orr
Timing and Structure
Michaelmas term. 12 lectures + 2 examples classes + coursework. Assessment: 75% exam/25% coursework.
Prerequisites
3D3 assumed
Aims
The aims of the course are to:
- carry further basic material on reinforced concrete studied in Part IIA, treat such matters as durability and corrosion, design of beams, slab, columns & frameworks (for shear and torsion as well as bending), but leaving prestressed concrete to 4D8.
Objectives
As specific objectives, by the end of the course students should be able to:
- have a good basic appreciation of the constituents and properties of concrete.
- understand deterioration processes affecting reinforced concrete, and how to control them.
- analyse simple concrete structural components and frameworks, and design them to practical requirements.
Content
Background to cement and concrete (1L)
Recent developments
Limit state design (1L)
- Probability concepts: partial safety factors (brief survey)
- Failure case studies.
Material properties (2L)
- Hydration and strength of cement paste;
- Uniaxial properties of concrete;
- Concrete under multiaxial stress.
Durability (2L)
- Net Present Value: whole life costing;
- Deterioration of concrete;
- Water migration through concrete; concrete in fire (brief mention)
- Corrosion of steel in concrete; preventative measures.
Reinforced concrete structures (6L)
- Serviceability: crack widths, deflections (revision)
- Initial sizing of members (revision of 3D3)
- Beams, slabs and frameworks at ultimate limit state;
- Column design, instability;
- Shear failure (and fracture mechanics);
- Truss analogy, torsion;
Coursework
This will consist of two parts (i) witnessing experimental laboratory techniques in the context of reinforced concrete testing, plus short write-up, and (ii) a short design exercise.
| Coursework | Format |
Due date & marks |
|---|---|---|
|
[Coursework activity #1 title / Interim] Coursework 1 brief description Learning objective: |
Individual/group Report / Presentation [non] anonymously marked |
day during term, ex: Thu week 3 [xx/60] |
|
[Coursework activity #2 title / Final] Coursework 2 brief description Learning objective: |
Individual Report anonymously marked |
Wed week 9 [xx/60] |
Booklists
Please see the Booklist for Group D Courses for references for this module.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
S1
The ability to make general evaluations of commercial risks through some understanding of the basis of such risks.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
P8
Ability to apply engineering techniques taking account of a range of commercial and industrial constraints.
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
Last modified: 31/08/2017 07:08
Engineering Tripos Part IIB, 4D6: Dynamics in Civil Engineering, 2017-18
Module Leader
Lecturers
Prof G Madabhushi, Dr J Talbot, Mr F A McRobie and Dr M DeJong
Lab Leader
Dr M DeJong
Timing and Structure
Lent term. 14 lectures + coursework. Assessment: 75% exam/25% coursework
Prerequisites
3D7, 3D2 and 3D4 useful
Aims
The aims of the course are to:
- introduce the behaviour and design of civil engineering structures subjected to time-varying loads.
- introduce earthquake-resistant design, dynamic soil-structure interaction, machine foundation design, blast effects on structures and the fundamentals of wind engineering.
Objectives
As specific objectives, by the end of the course students should be able to:
- identify cases where a static model of a structure is inadequate, and a dynamic model should be used
- produce a simple estimate of the natural frequency and fundamental natural mode of any linear-elastic structure.
- estimate linear-elastic spring parameters for a given foundation.
- compute the natural frequencies and natural modes of structures using the ABAQUS package and include simple soil models to account for soil-structure interaction.
- estimate the response of complex linear-elastic structures to earthquakes using modal superposition and the response spectrum.
- use elastic and inelastic design spectra, and to understand their form.
- perform simple designs for vibration isolation.
- perform simplified soil stiffness calculations accounting for partial liquefaction, and to use this approach in simple liquefaction resistant designs.
- describe some standard methods of seismic-resistant structural design.
- describe blast processes and their effects on structures.
- appreciate the factors involved in the estimation of wind climates and of structural response to wind.
- understand the various measures that characterise atmospheric turbulence.
- anticipate the circumstances under which aeroelastic phenomena may be problematic.
- estimate the dynamic response of a tall structure in a given wind environment
Content
LECTURE SYLLABUS
Structural dynamics (4L, Dr James Talbot)
Linear Elastic dynamics
á Introduction to dynamic loads in Civil Engineering; dynamic amplification factors.
á Approximate single-degree-of-freedom analysis of complex structures; sway frames; structures with distributed mass.
á Rayleigh's principle; natural frequency of simple systems using energy methods.
á Linear models to represent structures and their relevance; analysis in frequency domain; mode superposition method.
á Modal analysis of vibration; use of finite element packages.
Spectral Analysis & Earthquake Spectra (2L, Dr Matt DeJong)
á Introduction to spectral analysis
á Earthquake Spectra and Design Spectra, Design of linear systems
á Non-linear Spectral Analysis, Ductility in Structures
Application of dynamics in Civil Engineering Structures :
Part A: Soil-Structure Interaction (5L, Dr S.P.G.Madabhushi)
Non-linear Systems
á Sources of nonlinearity in structures and foundations.
á Analysis in time domain; numerical integration of equations of motion.
Seismic design
á Earthquake loading on structures; response and design spectra;
á Structures subject to ground motion; deformations due to lateral accelerations; Newmark's sliding block analysis; concept of threshold acceleration
á Foundations effects; stiffness of soil foundation and soil-structure interaction;
á Pore pressure build-up during earthquakes; partial liquefaction; degradation in soil stiffness; non-linear soil models.
á Liquefaction resistant design, simple examples.
á
Part B : Seismic resistant design, blast effects and wind engineering (3L, Mr F.A. McRobie)
Seismic Resistant Design
á Structural design and detailing considerations.
Blast Loading
á Physics of blasts; blast effects on structures; blast-resistant design.
Wind loading
á Nature of wind;
á Wind forces on structures.
á Response of structures to buffetting. Fluid-structure interaction (vortex-shedding, galloping and flutter). Long-span bridge case study.
Coursework
Seismic analysis of an existing tall building using the ABAQUS finite element package and a study of the effect of foundation softening on the overall structural response. Total time 8 hours.
| Coursework | Format |
Due date & marks |
|---|---|---|
|
[Coursework activity #1 title / Interim] Coursework 1 brief description Learning objective:
|
Individual/group Report / Presentation [non] anonymously marked |
day during term, ex: Thu week 3 [6/15] |
|
[Coursework activity #2 title / Final] Coursework 2 brief description Learning objective:
|
Individual Report anonymously marked |
Wed week 9 [9/15] |
Booklists
Please see the Booklist for Group D Courses for references for this module.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
E4
Understanding of and ability to apply a systems approach to engineering problems.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
Last modified: 19/01/2018 11:58
Engineering Tripos Part IIB, 4D6: Dynamics in Civil Engineering, 2018-19
Module Leader
Lecturers
Prof G Madabhushi and Prof FA McRobie
Lab Leader
Prof FA McRobie
Timing and Structure
Lent term. 14 lectures + coursework. Assessment: 75% exam/25% coursework
Prerequisites
3D7, 3D2 and 3D4 useful
Aims
The aims of the course are to:
- introduce the behaviour and design of civil engineering structures subjected to time-varying loads.
- introduce earthquake-resistant design, dynamic soil-structure interaction, machine foundation design, blast effects on structures and the fundamentals of wind engineering.
Objectives
As specific objectives, by the end of the course students should be able to:
- identify cases where a static model of a structure is inadequate, and a dynamic model should be used
- produce a simple estimate of the natural frequency and fundamental natural mode of any linear-elastic structure.
- estimate linear-elastic spring parameters for a given foundation.
- compute the natural frequencies and natural modes of structures using the ABAQUS package and include simple soil models to account for soil-structure interaction.
- estimate the response of complex linear-elastic structures to earthquakes using modal superposition and the response spectrum.
- use elastic and inelastic design spectra, and to understand their form.
- perform simple designs for vibration isolation.
- perform simplified soil stiffness calculations accounting for partial liquefaction, and to use this approach in simple liquefaction resistant designs.
- describe some standard methods of seismic-resistant structural design.
- describe blast processes and their effects on structures.
- appreciate the factors involved in the estimation of wind climates and of structural response to wind.
- understand the various measures that characterise atmospheric turbulence.
- anticipate the circumstances under which aeroelastic phenomena may be problematic.
- estimate the dynamic response of a tall structure in a given wind environment
Content
LECTURE SYLLABUS
Structural dynamics (4L, Dr James Talbot)
Linear Elastic dynamics
á Introduction to dynamic loads in Civil Engineering; dynamic amplification factors.
á Approximate single-degree-of-freedom analysis of complex structures; sway frames; structures with distributed mass.
á Rayleigh's principle; natural frequency of simple systems using energy methods.
á Linear models to represent structures and their relevance; analysis in frequency domain; mode superposition method.
á Modal analysis of vibration; use of finite element packages.
Spectral Analysis & Earthquake Spectra (2L, Dr Matt DeJong)
á Introduction to spectral analysis
á Earthquake Spectra and Design Spectra, Design of linear systems
á Non-linear Spectral Analysis, Ductility in Structures
Application of dynamics in Civil Engineering Structures :
Part A: Soil-Structure Interaction (5L, Dr S.P.G.Madabhushi)
Non-linear Systems
á Sources of nonlinearity in structures and foundations.
á Analysis in time domain; numerical integration of equations of motion.
Seismic design
á Earthquake loading on structures; response and design spectra;
á Structures subject to ground motion; deformations due to lateral accelerations; Newmark's sliding block analysis; concept of threshold acceleration
á Foundations effects; stiffness of soil foundation and soil-structure interaction;
á Pore pressure build-up during earthquakes; partial liquefaction; degradation in soil stiffness; non-linear soil models.
á Liquefaction resistant design, simple examples.
á
Part B : Seismic resistant design, blast effects and wind engineering (3L, Prof F.A. McRobie)
Seismic Resistant Design
á Structural design and detailing considerations.
Blast Loading
á Physics of blasts; blast effects on structures; blast-resistant design.
Wind loading
á Nature of wind;
á Wind forces on structures.
á Response of structures to buffetting. Fluid-structure interaction (vortex-shedding, galloping and flutter). Long-span bridge case study.
Coursework
Seismic analysis of an existing tall building using the ABAQUS finite element package and a study of the effect of foundation softening on the overall structural response. Total time 8 hours.
| Coursework | Format |
Due date & marks |
|---|---|---|
|
[Coursework activity #1 title / Interim] Coursework 1 brief description Learning objective:
|
Individual/group Report / Presentation [non] anonymously marked |
day during term, ex: Thu week 3 [6/15] |
|
[Coursework activity #2 title / Final] Coursework 2 brief description Learning objective:
|
Individual Report anonymously marked |
Wed week 9 [9/15] |
Booklists
Please see the Booklist for Group D Courses for references for this module.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
E2
Ability to extract data pertinent to an unfamiliar problem, and apply its solution using computer based engineering tools when appropriate.
E3
Ability to apply mathematical and computer based models for solving problems in engineering, and the ability to assess the limitations of particular cases.
E4
Understanding of and ability to apply a systems approach to engineering problems.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US3
An understanding of concepts from a range of areas including some outside engineering, and the ability to apply them effectively in engineering projects.
Last modified: 13/12/2018 12:10
Engineering Tripos Part IIB, 4D5: Foundation Engineering, 2018-19
Module Leader
Lecturers
Dr G Biscontin and Dr S K Haigh
Timing and Structure
Lent term. 14 lectures. Assessment: 100% exam
Prerequisites
3D2 assumed
Aims
The aims of the course are to:
- introduce the challenges of foundation design and examine possible solutions from simple pad footings, through piles and caissons.
Objectives
As specific objectives, by the end of the course students should be able to:
- assess the design requirements of a foundation.
- deduce appropriate soil properties for foundation design from site investigation data.
- decide whether to use a shallow or deep foundation.
- design shallow and deep foundations against collapse.
- design shallow and deep foundations against excessive settlement.
- explain the difference between drained and undrained response.
- recognise mechanisms which contribute to generating deformations and load capacity.
- back-analyse observed foundation performance
Content
All civil engineering structures from houses to tethered oil platforms require foundations.
The module begins by examining the requirements of a foundation; the applied loading, the acceptable deformations and the derivation of appropriate soil properties for each aspect of design.
The module then builds on material from 3D2 (geotechnical engineering) to examine theoretical solutions for the capacity (strength) and settlement (stiffness) of shallow and deep foundations under simple loading conditions in idealised soils. Strength is dealt with using plasticity. Stiffness is dealt with using elasticity. These theoretical solutions are then extended to more complex loading conditions and less idealised soils.
Obtaining geotechnical data
- Site investigation methods
- Field measurements of soil stiffness
- Laboratory assessment of soil strength and stiffness parameters
- Small strain stiffness of soils
Foundations Design
- Foundation types;
- Loading conditions;
- Relevant soil behaviour and soil models;
- Selection of design soil properties
Shallow Foundations
- Strength: undrained failure of strip footings: vertical (V), horizontal (H) and moment (M) capacity;
- Strength: drained failure of strip footings: V-H-M capacity, superposition of surcharge and self-weight effects;
- Effects of footing shape and embedment, and soil heterogeneity;
- Stiffness: elastic settlement of shallow foundations: drained and undrained;
- Stiffness: settlement of shallow foundations on non-linear soil.
Deep Foundations (6L)
- Deep foundation types and construction methods; piles and caissons.
- Pile strength: axial and lateral capacity;
- Pile stiffness: axial and lateral deformations;
- Piles: load testing, influence of installation method on performance;
- Pile groups: mutual influence, block behaviour, differential settlement;
Booklists
Please see the Booklist for Group D Courses for references for this module.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 31/05/2018 18:28
Engineering Tripos Part IIB, 4D5: Foundation Engineering, 2017-18
Module Leader
Lecturers
Dr G Biscontin and Dr S K Haigh
Timing and Structure
Lent term. 14 lectures. Assessment: 100% exam
Prerequisites
3D2 assumed
Aims
The aims of the course are to:
- introduce the challenges of foundation design and examine possible solutions; from simple pad footings, through piles and caissons, to drop-and drag-anchors.
Objectives
As specific objectives, by the end of the course students should be able to:
- assess the design requirements of a foundation.
- deduce appropriate soil properties for foundation design from site investigation data.
- decide whether to use a shallow or deep foundation.
- design shallow and deep foundations against collapse.
- design shallow and deep foundations against excessive settlement.
- explain the difference between drained and undrained response.
- recognise mechanisms which contribute to generating deformations and load capacity.
- back-analyse observed foundation performance
- appreciate lessons learnt from field data obtained from case histories.
Content
All civil engineering structures from houses to tethered oil platforms require foundations.
The module begins by examining the requirements of a foundation; the applied loading, the acceptable deformations and the derivation of appropriate soil properties for each aspect of design.
The module then builds on material from 3D2 (geotechnical engineering) to examine theoretical solutions for the capacity (strength) and settlement (stiffness) of shallow and deep foundations under simple loading conditions in idealised soils. Strength is dealt with using plasticity. Stiffness is dealt with using elasticity. These theoretical solutions are then extended to more complex loading conditions and less idealised soils. The course is widely illustrated with case studies from the offshore industry.
Foundations Design (2L)
- Foundation types;
- Loading conditions;
- Allowable deformations;
- Relevant soil behaviour and soil models;
- Selection of design soil properties
Shallow Foundations (6L)
- Strength: Undrained failure of strip footings: Vertical (V), Horizontal (H) and Moment (M) capacity;
- Strength: Drained failure of strip footings: V-H-M capacity, superposition of surcharge and self-weight effects;
- Effects of footing shape and embedment, and soil heterogeneity;
- Stiffness: Elastic settlement of shallow foundations: drained and undrained;
- Stiffness: Settlement of shallow foundations on non-linear soil.
Deep Foundations (6L)
- Deep foundation types and construction methods; piles, caissons, drop-anchors;
- Pile strength: Axial and lateral capacity;
- Pile stiffness: Axial and lateral deformations;
- Piles: load testing, influence of installation method on performance;
- Pile groups: mutual influence, block behaviour, differential settlement;
- Offshore solutions: caissons, anchors: installation methods and capacity.
Coursework
The preliminary evaluation of three design solutions for an offshore wind turbine foundation.
Booklists
Please see the Booklist for Group D Courses for references for this module.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
US4
An awareness of developing technologies related to own specialisation.
Last modified: 10/10/2017 12:07
Engineering Tripos Part IIB, 4D4: Digital Construction, 2024-25
Module Leader
Lecturer
Timing and Structure
Lent term - 14 lectures - Assessment: 100% coursework
Prerequisites
3D1, 3D2 & 4D16 useful
Aims
The aims of the course are to:
- familiarise students with key design and construction aspects of those areas of construction engineering which are commonly encountered in many major civil engineering projects.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand key issues in front-end planning and construction of major civil engineering infrastructure.
- understand the basics of construction site development, earth removing methods and earth excavation techniques.
- understand the basics for rock excavation and blasting.
- understand the practical considerations for loading and hauling operations including productivity estimation, fleet economics and equipment selection.
- understand the design, construction and operational aspects of compacting, finishing and paving operations for road infrastructure.
- analyse and evaluate the key principles and concepts of digital construction, including information modelling, monitoring,
- define the process of designing non-software specific modelling techniques in digital construction.
- apply critical thinking skills to assess the advantages and limitations of digital technologies in construction projects.
- evaluate and compare various digital tools and technologies used for project planning, design optimization, and data analysis.
- critically assess various types of sensors commonly used in construction as well as emerging trends and innovations in IoT and sensor technologies relevant to construction project monitoring.
- critically analyse a real-world case study involving the deployment of digital technology deployment in construction, to identify key challenges, innovative solutions, and lessons learned, and propose ways to adapt and apply these insights to address simi
Content
Coursework
This syllabus contributes to the following areas of the UK-SPEC standard:
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Coursework 1: Earthworks Construction earthwork and equipment: estimation of excavation soil volumes from drawings, earthwork production, blast design, logistics planning for transporting soils to/from project sites, paving and economics.
|
Individual Report
anonymously marked |
[30/60]
|
|
Coursework 2: Digital Construction Development of a custom rule-based algorithm to automatically segment a specific element from a 3D point cloud (provided to the students) and recover key geometric features. Identification of the key steps involved in creating an IFC schema extension to accommodate custom objects and relationships, and the integration of such extensions into existing IFC-compliant software applications.
|
Individual Report anonymously marked |
[30/60] |
Booklists
Please refer to the Booklist for Part IIB Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
Last modified: 17/12/2024 10:52
Engineering Tripos Part IIB, 4D4: Construction Engineering, 2020-21
Module Leader
Lecturer
Prof G Viggiani and Dr I Brilakis
Timing and Structure
Lent term - 14 lectures - Assessment: 100% coursework
Prerequisites
3D1, 3D2 and 4D16 useful
Aims
The aims of the course are to:
- familiarise students with key design and construction aspects of those areas of construction engineering which are commonly encountered in many major civil engineering projects.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand key issues in front-end planning and construction of major civil engineering infrastructure.
- understand the basics of construction site development, earth removing methods and earth excavation techniques.
- understand the basics for rock excavation and blasting.
- understand the practical considerations for loading and hauling operations including productivity estimation, fleet economics and equipment selection.
- understand the design, construction and operational aspects of compacting, finishing and paving operations for road infrastructure.
- address stability and deformation problems relating to different types of deep excavation construction (e.g. diaphragm walls, top-down construction, bottom-up construction) in different ground conditions.
- understand the principal design and construction problems associated with bored tunnel projects.
- estimate ground movements caused by deep excavations and tunnelling and assess their effects on buildings and services.
- select appropriate protective and ground improvement measures for different underground construction problems.
- understand the principal considerations associated with ground water control during construction.
- understand the conventional and advanced instrumentation techniques used for measuring ground movements and mechanical strain in practice including advantages and limitations.
Content
Coursework
Please refer to Form & conduct of the examinations.
This syllabus contributes to the following areas of the UK-SPEC standard:
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Coursework 1: Underground construction Underground construction (tunnelling), based on a real tunnelling project: tasks are to establish tunnel stability duting construction, assess the risk of damage to a building of considerable historical interest and design outline protective measures for the building. Learning objective:
|
Individual Report anonymously marked |
[30/60] |
|
Coursework 2: Earthworks Construction earthwork and equipment: estimation of excavation soil volumes from drawings, earthwork production, blast design, logistics planning for transporting soils to/from project sites, paving and economics. Learning objective:
|
Individual Report anonymously marked |
[30/60] |
Booklists
Please refer to the Booklist for Part IIB Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
Last modified: 01/09/2020 10:32
Engineering Tripos Part IIB, 4D4: Construction Engineering, 2021-22
Module Leader
Lecturer
Prof G Viggiani and Dr I Brilakis
Timing and Structure
Lent term - 14 lectures - Assessment: 100% coursework
Prerequisites
3D1, 3D2 and 4D16 useful
Aims
The aims of the course are to:
- familiarise students with key design and construction aspects of those areas of construction engineering which are commonly encountered in many major civil engineering projects.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand key issues in front-end planning and construction of major civil engineering infrastructure.
- understand the basics of construction site development, earth removing methods and earth excavation techniques.
- understand the basics for rock excavation and blasting.
- understand the practical considerations for loading and hauling operations including productivity estimation, fleet economics and equipment selection.
- understand the design, construction and operational aspects of compacting, finishing and paving operations for road infrastructure.
- address stability and deformation problems relating to different types of deep excavation construction (e.g. diaphragm walls, top-down construction, bottom-up construction) in different ground conditions.
- understand the principal design and construction problems associated with bored tunnel projects.
- estimate ground movements caused by deep excavations and tunnelling and assess their effects on buildings and services.
- select appropriate protective and ground improvement measures for different underground construction problems.
- understand the principal considerations associated with ground water control during construction.
Content
Coursework
Please refer to Form & conduct of the examinations.
This syllabus contributes to the following areas of the UK-SPEC standard:
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Coursework 1: Earthworks Construction earthwork and equipment: estimation of excavation soil volumes from drawings, earthwork production, blast design, logistics planning for transporting soils to/from project sites, paving and economics. Learning objective:
|
Individual Report
anonymously marked |
[30/60]
|
|
Coursework 2: Underground Construction Underground construction (tunnelling), based on a real tunnelling project: tasks are to establish tunnel stability duting construction, assess the risk of damage to a building of considerable historical interest and design outline protective measures for the building. Learning objective:
|
Individual Report anonymously marked |
[30/60] |
Booklists
Please refer to the Booklist for Part IIB Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
Last modified: 04/01/2022 18:23
Engineering Tripos Part IIB, 4D4: Construction Engineering, 2023-24
Module Leader
Lecturer
Timing and Structure
Lent term - 14 lectures - Assessment: 100% coursework
Prerequisites
4D16 useful
Aims
The aims of the course are to:
- familiarise students with key design and construction aspects of those areas of construction engineering which are commonly encountered in many major civil engineering projects.
Objectives
As specific objectives, by the end of the course students should be able to:
- understand key issues in front-end planning and construction of major civil engineering infrastructure.
- understand the basics of construction site development, earth removing methods and earth excavation techniques.
- understand the basics for rock excavation and blasting.
- understand the practical considerations for loading and hauling operations including productivity estimation, fleet economics and equipment selection.
- understand the design, construction and operational aspects of compacting, finishing and paving operations for road infrastructure.
- analyse and evaluate the key principles and concepts of digital construction, including information modelling, monitoring,
- define the process of designing non-software specific modelling techniques in digital construction.
- apply critical thinking skills to assess the advantages and limitations of digital technologies in construction projects.
- evaluate and compare various digital tools and technologies used for project planning, design optimization, and data analysis.
- critically assess various types of sensors commonly used in construction as well as emerging trends and innovations in IoT and sensor technologies relevant to construction project monitoring.
- critically analyse a real-world case study involving the deployment of digital technology deployment in construction, to identify key challenges, innovative solutions, and lessons learned, and propose ways to adapt and apply these insights to address simi
Content
Coursework
This syllabus contributes to the following areas of the UK-SPEC standard:
| Coursework | Format |
Due date & marks |
|---|---|---|
|
Coursework 1: Earthworks Construction earthwork and equipment: estimation of excavation soil volumes from drawings, earthwork production, blast design, logistics planning for transporting soils to/from project sites, paving and economics.
|
Individual Report
anonymously marked |
[30/60]
|
|
Coursework 2: Digital Construction Development of a custom rule-based algorithm to automatically segment a specific element from a 3D point cloud (provided to the students) and recover key geometric features. Identification of the key steps involved in creating an IFC schema extension to accommodate custom objects and relationships, and the integration of such extensions into existing IFC-compliant software applications.
|
Individual Report anonymously marked |
[30/60] |
Booklists
Please refer to the Booklist for Part IIB Courses for references to this module, this can be found on the associated Moodle course.
Examination Guidelines
Please refer to Form & conduct of the examinations.
UK-SPEC
This syllabus contributes to the following areas of the UK-SPEC standard:
Toggle display of UK-SPEC areas.
GT1
Develop transferable skills that will be of value in a wide range of situations. These are exemplified by the Qualifications and Curriculum Authority Higher Level Key Skills and include problem solving, communication, and working with others, as well as the effective use of general IT facilities and information retrieval skills. They also include planning self-learning and improving performance, as the foundation for lifelong learning/CPD.
IA1
Apply appropriate quantitative science and engineering tools to the analysis of problems.
IA2
Demonstrate creative and innovative ability in the synthesis of solutions and in formulating designs.
KU1
Demonstrate knowledge and understanding of essential facts, concepts, theories and principles of their engineering discipline, and its underpinning science and mathematics.
KU2
Have an appreciation of the wider multidisciplinary engineering context and its underlying principles.
E1
Ability to use fundamental knowledge to investigate new and emerging technologies.
P1
A thorough understanding of current practice and its limitations and some appreciation of likely new developments.
P3
Understanding of contexts in which engineering knowledge can be applied (e.g. operations and management, technology, development, etc).
US1
A comprehensive understanding of the scientific principles of own specialisation and related disciplines.
Last modified: 12/01/2024 11:23
Pages
